Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, the District of Columbia, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

According to Duane Buziak, student loan debt rarely blocks a mortgage; the way the payment is counted usually decides the outcome. By the end of this guide you’ll know your real debt-to-income number, which payment figure each loan program uses, and how to line up a file for student loan debt mortgage approval. Before you start, gather your latest student loan statements, recent pay stubs, and a rough target home price. Rate Hawk works on a simple idea: We Don’t Just Look. We Hunt.

Step 1: Pull Your Student Loan Details and Credit Reports

Start with a complete inventory. Log into studentaid.gov to see your federal loans, then log into each servicer’s site. For every loan, write down:

Private loans won’t appear on studentaid.gov, so check your credit report for any lender you don’t recognize.

Next, request your free reports at annualcreditreport.com. Confirm that each student loan shows up once, with the right balance and payment. Duplicate tradelines from a transferred servicer are common, and a duplicate can double the payment a lender counts. If you find an error, dispute it with the bureau that reports it and keep the confirmation.

You can also ask Duane Buziak for a free no-touch credit check. It previews what lenders will see without a hard inquiry, so you can spot problems before they cost you points.

Mistake to avoid: assuming a $0 payment on an income-driven plan will be treated as $0 by every lender. It won’t. Some programs accept a documented $0 payment, others substitute a percentage of your balance. Note the figure now and handle it in Step 2.

Step 2: Learn How Each Loan Program Counts Your Student Loan Payment

The balance matters far less than the monthly figure a program plugs into your debt-to-income ratio, and that figure changes by program. The table below summarizes general treatment as of 2026. Guidelines are updated often, and individual lenders add overlays, so treat it as a map and confirm specifics before you rely on them.

Program Governing source Credit report shows $0 payment Documented income-driven payment Loan is deferred or in forbearance
Conventional Fannie Mae Selling Guide A documented $0 income-driven payment can generally be used with proof from the servicer Generally accepted at the documented amount Generally 1% of the balance or a fully amortizing payment, if documented
FHA HUD Handbook 4000.1 Typically a percentage of the balance unless the servicer documents the actual payment Generally accepted with servicer documentation Typically a percentage of the balance, or the documented payment
VA VA Lenders Handbook Lender judgment under VA guidance, often with overlays Generally accepted when documented Treatment depends on how long the deferment lasts after closing
Jumbo Investor guidelines Varies by investor Varies, often well documented Often a percentage of the balance, set by the investor

The anchor for conventional loans is the Fannie Mae Selling Guide. As of 2026, it allows a documented actual payment, including a verified $0 income-driven payment, while 1% of the balance is the common fallback when no usable payment exists. For FHA, HUD.gov publishes Handbook 4000.1, which sets its own treatment for deferred loans and loans reporting $0. For VA loans, the VA Lenders Handbook governs deferred debt. I haven’t listed exact percentages for FHA or VA here because they have changed over time; your loan officer should show you the current wording.

Jumbo loans sit above the conforming limit. FHFA.gov publishes the annual figures, and as of 2026 the baseline one-unit limit in most counties is $832,750. Above that, each investor sets its own student loan rules.

Duane Buziak says the same borrower can look very different depending on the program. That is where the hunt starts: Watch. Compare. Save.

Step 3: Calculate Your Debt-to-Income Ratio the Way Duane Buziak Does

Debt-to-income (DTI) is your total monthly debts divided by gross monthly income. The front-end ratio counts only the proposed housing payment. The back-end ratio adds student loans, car payments, and card minimums. The CFPB’s DTI explainer covers the basics.

Here is an illustration with invented figures. Suppose a buyer in Tennessee earns $6,500 gross per month, owes $38,000 in student loans, pays $350 on a car loan, and $75 in card minimums. The proposed housing payment is $2,100. The income-driven payment is $210, while 1% of the balance would be $380.

The front-end ratio is 32.3% either way ($2,100 divided by $6,500). Now test the ceiling. If we assume a 45% back-end target for this example only, total debts can reach $2,925. That leaves $2,290 for housing with the $210 payment, but $2,120 with the $380 payment. The $170 gap equals roughly $27,000 of loan amount at an illustrative 6.5% rate, principal and interest only. Same buyer, same loans, different purchasing power.

Don’t treat 45% as a rule. Actual limits depend on the automated underwriting findings, which weigh credit, reserves, and down payment together. The Fannie Mae Selling Guide explains how its system evaluates risk.

Run this math at a realistic price for where you’re buying, such as a Tennessee, Georgia, or Maryland price point, and use your own numbers.

Step 4: Fix What You Can Before You Apply

Begin with documentation. Get a servicer letter, or a screenshot from studentaid.gov, showing your current repayment plan and monthly amount. A payment you can prove is far more useful than one a lender has to guess at.

Payment history comes next. Any late student loan payment, and especially a loan in default, needs attention before you apply. Federal loan rules, including repayment plans and default resolution options such as rehabilitation, have been changing, so confirm current options with your servicer or studentaid.gov rather than relying on older advice. Then ask your loan officer how soon a resolved loan can be treated as in good standing for your program.

Then make targeted moves:

Be careful about paying off a student loan in one lump sum. It feels responsible, but it can drain the cash you need for a down payment, closing costs, and reserves. Use your Step 3 math to decide.

Suppose a small private loan has a $4,000 balance and a $120 payment. Paying it off removes $120 from your monthly debts, which at a 45% target frees up the same $120 for housing. If that $4,000 is what keeps your reserves healthy, the trade may not be worth it. If you have the cash to spare, it may be a strong move. Run both versions and compare.

Step 5: Hunt Your Rate and Compare Offers Using the Same Numbers

Rate shopping only works when every offer starts from the same inputs. Give each lender the same purchase price, down payment, loan type, credit profile, and student loan payment treatment. If one lender counts $210 and another counts $380, their quotes aren’t comparable, and the cheaper-looking one may fall apart in underwriting.

Ask for a Loan Estimate from each. The CFPB’s Loan Estimate explainer walks through the form. Compare these items:

Lender credits usually come with a higher rate, so look at the trade-off rather than the headline number.

Direct lenders such as Rocket, Movement, and Lower are all reasonable places to get a quote. Lower deserves credit for its digital application and pricing transparency. Duane Buziak is a broker with direct access to PowerTPO, which is Lower LLC’s own wholesale subsidiary. That means the same underwriters without a retail markup. It is not a claim of a lower rate. It is one more channel to compare, and the numbers decide.

Duane Buziak returns calls the same day, which matters when you’re comparing quotes with a clock running. The Rate Hawk approach is simple: watch the market, search the programs, compare the offers, and move when the numbers line up.

Step 6: Assemble Your Documents and Get Pre-Approved

Gather these documents before you talk to a loan officer:

  1. Two years of W-2s or tax returns (self-employed buyers need returns)
  2. Thirty days of recent pay stubs
  3. Two months of bank statements, all pages
  4. Government-issued photo ID
  5. The student loan documentation from Step 4

Prequalification is a quick estimate based on what you tell a lender. Pre-approval means a loan officer has reviewed your documents and credit, and run automated underwriting. Sellers and agents give the second one far more weight because it shows you’ve been checked, not just asked.

Ask your loan officer to run automated underwriting with the correct student loan payment, the one backed by your documents. If the system runs on a placeholder figure and the real one comes out later, your approval can be revised after you’ve made an offer.

Between pre-approval and closing, hold your profile steady. Avoid changing jobs, opening credit, financing furniture, or switching repayment plans. Each can change your DTI or trigger a fresh review. If something must change, tell your loan officer first.

Lining Up Your Student Loan Numbers Before You Make an Offer

Before you apply, re-check that your payment figure matches your documents. The servicer letter, the credit report, and the number in your DTI worksheet should all agree. Then contact Duane Buziak at Mortgage Rate Hawk for a no-touch credit check and a side-by-side program comparison, so you can see how Conventional, FHA, VA, and Jumbo treat your loans.

Your dream home is waiting, so don’t let the mortgage process hold you back. Get your free rate comparison and personalized loan match today, with same-day expert guidance to help you find the right path forward, whether you’re a first-time buyer or ready to refinance.

Leave a Reply

Your email address will not be published. Required fields are marked *